搜索结果: BU40 在%分类%.标签=在 DIAC
立刻对该型号询价  »

输入您想要的元器件型号以获得相关报价，或在本页底部的近似型号中优化您的搜索条件。
如果您还不是Broker Forum的会员，即刻获取 免费登录来联系 BU40供应商

DIAC

The DIAC, or "diode for alternating current", is a diode that conducts current only after its breakover voltage, VBO, has been reached momentarily. When this occurs, the diode enters the region of negative dynamic resistance, leading to a decrease in the voltage drop across the diode and, usually, a sharp increase in current through the diode. The diode remains "in conduction" until the current through it drops below a value characteristic for the device, called the holding current, IH. Below this value, the diode switches back to its high-resistance (non-conducting) state. This behavior is bidirectional, meaning typically the same for both directions of current. Most DIACs have a three-layer structure with breakover voltage around 30 V. Their behavior is somewhat similar to that of a neon lamp, but it is much more precisely controlled and takes place at a lower voltage. DIACs have no gate electrode, unlike some other thyristors that they are commonly used to trigger, such as TRIACs. Some TRIACs, like Quadrac, contain a built-in DIAC in series with the TRIAC's "gate" terminal for this purpose. DIACs are also called symmetrical trigger diodes due to the symmetry of their characteristic curve. Because DIACs are bidirectional devices, their terminals are not labeled as anode and cathode but as A1 and A2 or MT1 ("Main Terminal") and MT2.

SCR > DIAC > TRIAC > Thyristor

型号	DS	厂牌	批号	数量	地区	采购
L4004L5		Littelfuse	-	98	台湾	要求报价

发送零件号 BU40 的询价   »