Результаты поиска: BTB16 в DIAC
Запрос на ценовое предложение (RFQ)  »

Выбeрите позицию, чтобы получить ценовое предложение по номеру детaли BTB16 или используйте раздел «Варианты поиска по номеру детали» внизу этой страницы.
Если Вы еще не партнер The Broker Forum, получите свой бесплатный доступ для установления связи с BTB16 продавцами.

DIAC

The DIAC, or "diode for alternating current", is a diode that conducts current only after its breakover voltage, VBO, has been reached momentarily. When this occurs, the diode enters the region of negative dynamic resistance, leading to a decrease in the voltage drop across the diode and, usually, a sharp increase in current through the diode. The diode remains "in conduction" until the current through it drops below a value characteristic for the device, called the holding current, IH. Below this value, the diode switches back to its high-resistance (non-conducting) state. This behavior is bidirectional, meaning typically the same for both directions of current. Most DIACs have a three-layer structure with breakover voltage around 30 V. Their behavior is somewhat similar to that of a neon lamp, but it is much more precisely controlled and takes place at a lower voltage. DIACs have no gate electrode, unlike some other thyristors that they are commonly used to trigger, such as TRIACs. Some TRIACs, like Quadrac, contain a built-in DIAC in series with the TRIAC's "gate" terminal for this purpose. DIACs are also called symmetrical trigger diodes due to the symmetry of their characteristic curve. Because DIACs are bidirectional devices, their terminals are not labeled as anode and cathode but as A1 and A2 or MT1 ("Main Terminal") and MT2.

SCR > DIAC > TRIAC > Thyristor

Наименование детали	DS	Производитель	Дата выпуска	Кол-во	Регион	Активный
BTB16-600SWRG		STM	-	1750	South Korea	Связаться с продавцом
BTB16-600SWRG		STM	2022+	1750	Taiwan	Связаться с продавцом

Отправьте запрос на искомый компонент BTB16   »