Результаты поиска: AQZ202J
в Amplifiers and Comparators
Запрос на ценовое предложение (RFQ) »
Выбeрите позицию, чтобы получить ценовое предложение по номеру детaли AQZ202J или используйте раздел «Варианты поиска по номеру детали» внизу этой страницы.
Если Вы еще не партнер The Broker Forum, получите свой
бесплатный доступ для установления связи с AQZ202J продавцами.
Amplifiers and Comparators
In electronics, a comparator is a device that compares two voltages or currents and outputs a digital signal indicating which is larger. It has two analog input terminals V_+\, and V_-\, and one binary digital output V_o\,. The output is ideally A comparator consists of a specialized high-gain differential amplifier. They are commonly used in devices that measure and digitize analog signals, such as analog-to-digital converters (ADCs), as well as relaxation oscillators. An operational amplifier (op-amp) has a well balanced difference input and a very high gain. This parallels the characteristics of comparators and can be substituted in applications with low-performance requirements.[4] In theory, a standard op-amp operating in open-loop configuration (without negative feedback) may be used as a low-performance comparator. When the non-inverting input (V+) is at a higher voltage than the inverting input (V-), the high gain of the op-amp causes the output to saturate at the highest positive voltage it can output. When the non-inverting input (V+) drops below the inverting input (V-), the output saturates at the most negative voltage it can output. The op-amp's output voltage is limited by the supply voltage. An op-amp operating in a linear mode with negative feedback, using a balanced, split-voltage power supply, (powered by ± VS) has its transfer function typically written as: V_{out}=A_{o} (V_1 - V_2). However, this equation may not be applicable to a comparator circuit which is non-linear and operates open-loop (no negative feedback)
